55 Christie Point SW, Calgary. Inside the Avenue Health building.
Avenue Aesthetics

Radiofrequency skin tightening, by Cynosure Lutronic

XerfSkin tightening in Calgary

Radiofrequency skin tightening for the face and neck, with no needles, no numbing and no downtime.

Treatments from $500. Not sure yet? You can start with a free 15 minute consultation (opens in a new tab).

A woman with her hair pulled back, looking at the camera. Campaign photograph by Cynosure Lutronic.
Price
From $500
Appointment
75 minutes
Sessions
Two, a month apart, recommended for best results
Comfort
No needles, no numbing
Downtime
None

What it is used for

A provider holds the Xerf handpiece under a woman’s chin as she rests on a treatment bed.

Loose skin on the face and neck

Read about loose skin on the face and neck
A provider moves the Xerf handpiece across a woman’s cheek.

Fine lines and wrinkles

Read about fine lines and wrinkles
The Xerf handpiece rests on a woman’s forehead, above the brow.

A heavier brow

Coming soon: Xerf for the body. A body handpiece is on its way to Avenue, for larger areas. Read about loose skin on the body

Photographs by Cynosure Lutronic. They show models, not Avenue Aesthetics patients.

Two frequencies, three depths.

Xerf places radiofrequency energy in the shallow, middle and deep layers of the skin, and cools the surface as it works. That is why there are no needles and no numbing.

How Xerf works, in full
Cynosure Lutronic diagram of the skin in cross-section with three arrows. Shallow: treats the epidermis and dermis of the skin. Middle: treats the subcutaneous fascia. Deep: treats the deep layer.
Diagram by Cynosure Lutronic. For illustration only.
  1. ShallowEpidermis and dermis

    Lines on the forehead, and around the eyes, mouth and neck.

  2. MiddleSubcutaneous fascia

    Lifting the brow, and tightening the face and neck.

  3. DeepThe deepest layer, with both frequencies

    The cheeks, jawline and jowls, and under the chin.

In Canada, Xerf is licensed for facial lines and wrinkles, lifting the eyebrow, and laxity of the face and neck. “Skin tightening” refers to tightening that occurs through soft tissue coagulation.

How Xerf works

Xerf delivers radiofrequency energy through the surface of the skin at three depths, while cooling the surface as it works. There are no needles and no numbing, and the skin rebuilds collagen over the months that follow.

  1. 01

    Cooled surface

    Illustration: a smooth handpiece resting on the skin, with the surface layer cooled.

    The handpiece cools the top layer of skin with every pulse, so no numbing is needed.

  2. 02

    Three depths of heat

    Illustration: warmth at three depths beneath the handpiece while the surface stays cool.

    Two frequencies place warmth in the shallow, middle and deep layers, set for each area.

  3. 03

    Firmer skin

    Illustration: a cross-section of skin with denser, renewed collagen.

    Collagen rebuilds over three to six months, and the skin looks firmer and lifted.

Treatment areas

In Canada, Xerf is licensed for the face and neck: lines and wrinkles, lifting the brow, and laxity.

  • Full face
  • Around the eyes
  • Jawline and chin
  • Neck

Illustrations, not photographs of treatment.

What makes Xerf different

  1. 01

    Two frequencies

    Xerf uses 6.78 MHz and 2 MHz. Its deep setting applies both in turn, which is how its energy reaches the deepest of its three layers.

  2. 02

    Three depths, ten levels

    Shallow, middle and deep settings, each with ten energy levels. Your provider chooses them area by area, so the brow, cheeks, jaw and neck each get their own setting.

  3. 03

    Cooled as it works

    Integrated cryogen cooling, with three cooling levels, protects the surface while the Wave Fit pulse delivers steady heat. That is why there are no needles and no numbing.

  4. 04

    It reads your skin

    Impedance feedback reads your skin as it works, and treatment stays at about 38 to 43°C, which Cynosure Lutronic describes as moderate warmth.

  5. 05

    A new tip every time

    Every Xerf tip is single-use and is discarded after your treatment. Wide tips treat the face and neck; small tips treat around the eyes and mouth.

Harper’s Bazaar Pro Treatment Editor’s Choice 2025NewBeauty Award Winner 2026, Best Radio-Frequency Skin-Tightening TreatmentELLE Tools and Treatments Awards 2026, Best Skin-Tightening TreatmentShape Skin Awards 2026, Best for Tightening and LiftingDaytime Beauty Awards 2026, The Inventor’s Award

Award-winning technology

Xerf has won beauty-press awards for skin tightening.

Harper’s Bazaar, NewBeauty, ELLE, Shape and the Daytime Beauty Awards recognised Xerf in 2025 and 2026, as its maker, Cynosure Lutronic, shows on its own site. Avenue offers Xerf on Cynosure Lutronic’s own equipment, with a new single-use tip for every treatment.

Areas, prices and settings

A model in her fifties, face and neck, looking slightly away.

Full face and neck

$1,500, 75 minutes

Lines and wrinkles, a heavier brow, and laxity across the face and neck.

Wide tips. Shallow for the forehead, middle for a brow lift, middle or deep for the cheeks and jaw.

A model in side profile, showing the jawline and the skin under the chin.

Lower face and under the chin

$750, 60 minutes

Softening along the jawline, early jowls, and the skin under the chin.

Wide tip, middle or deep setting.

A model with her chin lifted, showing the front of the neck.

Face only, or neck only

$1,000, 60 minutes

The whole face, or the neck on its own for looseness and fine lines.

Neck: wide tip, shallow or middle setting. The thyroid and voice box area is not treated.

A model with her eyes closed, the eye and brow area in close-up.

Around the eyes

$500, 60 minutes

Fine lines around the eyes and a heavier brow.

Small tip, shallow or middle setting, kept outside the bony rim of the eye.

Per session, plus GST, as listed in Jane. Settings follow Cynosure Lutronic’s Canadian treatment guide; your provider sets them for you. Photographs show models.

What to expect, and when

  1. During

    Warm, not painful

    Steady warmth as the handpiece moves, with the surface cooled. No numbing to wait for.

  2. Straight after

    A tighter feel

    Many people feel tighter skin at once. Mild redness or swelling can last one to three days.

  3. About a month later

    Second session

    Two sessions, a month apart, are recommended for best results.

  4. Three to six months

    The main change

    Collagen keeps rebuilding, and more noticeable firming develops over these months.

  5. Later

    Maintenance

    A maintenance treatment later may help keep the result. Your provider plans it with you.

Xerf, explained

Avenue infographic: no numbing, cooling, warmth of about 38 to 43 degrees, done in 75 minutes.

Your treatment

What Xerf feels like

There is no numbing to wait for. The surface is cooled with every pulse while warmth builds deeper in the skin, at about 38 to 43°C, which Cynosure Lutronic describes as moderate warmth. Xerf reads your skin as it works, and your provider adjusts energy and cooling for your comfort.

Avenue infographic: what to do and avoid before Xerf.

Getting ready

Before your Xerf treatment

A little preparation keeps the skin ready for treatment.

  • Avoid sun and tanning, including self-tanner, for 2 to 4 weeks
  • Stop retinoids and exfoliating acids 5 to 7 days before
  • No peels, microdermabrasion or waxing for 1 to 2 weeks
  • Drink plenty of water, and arrive with clean skin
  • Xerf waits four weeks after filler or Botox in the area
Avenue infographic: aftercare after Xerf.

After Xerf

Caring for your skin afterwards

You can go back to your day straight away. Mild redness or swelling can appear and settle within one to three days.

  • A gentle moisturiser every day
  • SPF 50, and stay out of the sun
  • No ice or cooling packs on the area
  • No cosmetics with alcohol for a week
Avenue infographic: how Xerf, neurotoxin and filler differ.

A common question

Xerf, Botox and filler

They do different jobs. Xerf works on the structure of the skin, tightening it through gentle heat and new collagen. Neurotoxins relax the muscles behind expression lines, and fillers restore volume. Cynosure Lutronic describes injectables as complementing Xerf, not replacing it. Timing matters: Xerf waits four weeks after filler or neurotoxin in the area.

Avenue infographic: who Xerf suits and what to tell your provider.

Is it for me?

Is Xerf right for you?

Xerf often suits mild to moderate sagging of the face or neck, in any skin tone, for someone in good health who would rather avoid needles and downtime. It does not replace a facelift where there is a lot of loose skin.

  • Tell your provider about a pacemaker or other implanted device
  • Pregnancy or breastfeeding
  • Recent filler, Botox or a facelift
  • Tanned skin, or a history of keloids

Results from Xerf

Before and after photographs of a jawline in side profile, after one Xerf treatment. Supplied by Cynosure Lutronic. (enlarge)
Jawline, after one treatment
Before and after photographs of a face from the front, after one Xerf treatment. Supplied by Cynosure Lutronic. (enlarge)
Face, after one treatment
Before and after photographs of a neck in side profile, after one Xerf treatment. Supplied by Cynosure Lutronic. (enlarge)
Neck, after one treatment
Before and after photographs of the lower face from the front, after two Xerf treatments. Supplied by Cynosure Lutronic. (enlarge)
Lower face, after two treatments
Enlarged result photograph

Photographs supplied by Cynosure Lutronic and shown as supplied. They are not Avenue Aesthetics patients. Individual results vary.

Your visit

  1. BeforeNo sun, retinoids or exfoliants in the days before. Arrive with clean skin.
  2. DuringWarm and comfortable, with no numbing to wait for.
  3. AfterwardsBack to your day. Mild redness or swelling can last one to three days.
  4. Follow-upTwo sessions, a month apart, are recommended for best results.
Preparing and aftercare, in full

The detail

Everything else, when you want it. If your question is not here, ask us before you book.

Book Xerf (opens in a new tab)
How Xerf works, in full

Xerf is a radiofrequency skin tightening treatment made by Cynosure Lutronic. Radiofrequency energy warms the tissue beneath the surface of the skin, and the body responds by rebuilding collagen in the weeks that follow.

Cynosure Lutronic describes Xerf as the world’s first multifrequency monopolar radiofrequency treatment. It combines two frequencies, 6.78 MHz and 2 MHz, so energy can be placed in the shallow, middle and deep layers of the skin instead of at one depth only.

The treatment is adjusted to you. There are three depth settings and ten intensity levels, and the device measures your skin as it works. A cryogen cooling system protects the upper layers of the skin throughout, so there are no needles and no numbing.

In Canada, Xerf is licensed as a non-invasive aesthetic treatment for facial lines and wrinkles, lifting the eyebrow, and laxity of the face and neck. Where this page says skin tightening, it means tightening that occurs through soft tissue coagulation, which is how the licence describes it.

What Xerf is used for

Loose skin on the face and neck. Laxity of the face and neck is one of the uses Xerf is licensed for in Canada. Cynosure Lutronic describes the ideal candidate as someone with mild to moderate sagging.

Fine lines and wrinkles. Facial lines and wrinkles are among the uses Xerf is licensed for in Canada.

Loose skin on the body. A Xerf handpiece for the body is on its way to Avenue. It covers larger areas faster, for skin on the body that has lost firmness. Ask us to let you know when it arrives.

A heavier brow. Lifting the eyebrow is one of the licensed uses in Canada. Your provider will tell you whether it applies to you.

Areas treated here. Full face and neck.

Is Xerf right for me?

It may suit you if

  • You have mild to moderate sagging of the face or neck and are in good general health.
  • You would like a treatment with no needles and no numbing.
  • You cannot take time away from work or family to recover.
  • You have any skin tone. Xerf is intended for all skin types.

Tell your provider if

  • You have a pacemaker, an implanted defibrillator or any other implanted electrical device. Xerf is not used in that case.
  • You are pregnant or breastfeeding. Xerf is not used during either.
  • You have had filler or neurotoxin injections in the last four weeks, a facelift in the last two months, or fat or skin grafting in the area in the last six months.
  • You have a metal implant, a history of keloid scarring, epilepsy, diabetes, an autoimmune condition, cancer or a blood disorder, or you take blood thinners or long-term anti-inflammatory medication.
  • Your skin is tanned or sunburnt, you have a recent tattoo or cosmetic tattoo in the area, or you get cold sores.
Preparing and aftercare

Before your visit. Stay out of the sun and avoid tanning, including self-tanner, for two to four weeks. Stop retinoids, glycolic or salicylic acids and other exfoliants five to seven days before. Avoid peels, microdermabrasion and waxing in the area for one to two weeks. Drink plenty of water in the day or two before, and arrive with no makeup or lotion on the area.

During treatment. There is no numbing to wait for. Your provider sets the depth and intensity for each area and moves the handpiece across the face and neck. The treatment feels warm and comfortable, because the device cools the skin as it delivers energy below the surface. We book 75 minutes for the full face and neck, and 60 minutes for a smaller area: the face or neck alone, the lower face, or the eyes.

Afterwards. You can go back to most daily activities straight away. Mild redness and swelling may appear and can last one to three days. Do not put ice or a cooling pack on the area. Use a gentle moisturizer every day, avoid cosmetics that contain alcohol for a week, stay out of the sun and wear SPF 50.

Follow-up. Two sessions, a month apart, are recommended for best results. Your provider will tell you when to come back and whether a maintenance treatment later would suit you.

How Xerf is set for each area

Cynosure Lutronic’s Canadian treatment guide sets Xerf area by area. The forehead is treated with a wide tip on the shallow setting for lines, and on the middle setting to lift the brow. The cheeks and the lower face, including the jawline and under the chin, take a wide tip on the middle or deep setting.

Around the eyes and mouth, a small tip is used on the shallow or middle setting, and treatment stays outside the bony rim of the eye. The neck takes a wide tip on the shallow or middle setting, and the thyroid and voice box area is not treated. Your provider adjusts the energy level for your skin as they go.

Xerf, Botox and filler

They do different jobs. Xerf works on the structure of the skin itself, tightening it through gentle heat and new collagen. Neurotoxins such as Botox relax muscles, and fillers restore volume. Cynosure Lutronic describes injectables as complementing structural work like Xerf, not replacing it.

If you have injectables too, timing matters: Xerf waits four weeks after filler or neurotoxin in the area. Tell your provider what you have had and when.

Who Xerf suits best

Xerf suits mild to moderate sagging of the face and neck, in any skin tone, for someone in good general health who would rather not have needles or downtime. It is often chosen when the first signs show: a softer jawline, a heavier brow, or looser skin on the neck.

It does not replace a facelift where there is a lot of loose skin. Your provider will tell you plainly if surgery would serve you better.

How long results last

Results build as collagen rebuilds, with the main change at three to six months. Cynosure Lutronic describes the result as long-lasting with maintenance: like fitness, it holds best with a maintenance treatment over time. Individual results vary.

What results to expect

Many people feel a tighter feeling in the skin straight away. In the weeks after treatment collagen continues to rebuild, and Cynosure Lutronic says more noticeable improvement develops over the next three to six months.

The aim is a subtle, natural-looking change, not a different face. Individual results vary, and your provider will tell you what is realistic for you before you decide.

Does Xerf hurt?

It is designed for comfort. The treatment feels warm, and the device cools the skin as it works, so there are no needles and no numbing.

How long is the appointment?

Cynosure Lutronic says a session usually takes 30 to 60 minutes, depending on the area. We book 75 minutes for the full face and neck, and 60 minutes for a smaller area: the face or neck alone, the lower face, or the eyes.

Is there any downtime?

No. You can go back to most daily activities straight away. Mild redness and swelling may appear and can last one to three days.

How many sessions will I need?

Two sessions, a month apart, are recommended for best results. Your provider will set out a plan for you.

When will I see results?

Many people feel a tighter feeling in the skin straight away. More noticeable improvement develops over the next three to six months as collagen rebuilds. Individual results vary.

Is Xerf suitable for my skin tone?

Yes. Xerf is intended for all skin types and tones. Your provider will still check your skin and your health history first.

Can I have Xerf in summer?

Yes, treatments are available all year. You will be asked to stay out of the sun and avoid tanning for two to four weeks beforehand, because Xerf is not used on tanned skin, and to wear sunscreen afterwards.

Is a new tip used for every treatment?

Yes. Every Xerf tip is single-use and is discarded after your treatment.

Can I have Xerf if I have Botox or filler?

Yes, with timing. Xerf works on the skin’s structure, while injectables relax muscles or add volume, so they can complement each other. Xerf waits four weeks after filler or neurotoxin in the area.

How long do Xerf results last?

The main change develops over three to six months as collagen rebuilds. Cynosure Lutronic describes results as long-lasting with maintenance. Individual results vary.

Is Xerf licensed in Canada?

Yes. Its Health Canada indications are facial lines and wrinkles, lifting the eyebrow, and laxity of the face and neck.

Should I choose Xerf or Morpheus8?

They work differently. Xerf has no needles, no numbing and no downtime. Morpheus8 uses fine needles with radiofrequency, needs numbing cream and a few days of recovery, and is usually the one discussed when texture is part of the concern. Your provider will help you choose.

Get in touch

Thoughtful care. A personal conversation.

Tell us what you would like to change and a provider will reply about Xerf.

  1. Book onlineChoose your treatment and a time on Jane, our booking system. The price is shown before you confirm.
  2. Or talk firstConsultations for Morpheus8, laser hair removal and intimate wellness are free. Or send the note and we will call you.
  3. On the dayYour provider goes over your skin and your plan with you in a private room before anything starts.
403-891-3736
info@avenuehealth.ca
Avenue Aesthetics, inside Avenue Health
55 Christie Point SW, Calgary, AB T3H 6G1
Monday to Friday 9 to 4, Saturday 9 to 1, by appointment
5.0 on Google, from 69 reviewsRead the reviews (opens in a new tab)

Giving a treatment as a gift? Gift cards are available online.

Send us a note

Tell us how to reach you. We will take it from there. We need your name and either a phone number or an email.

By sending this note you agree to be contacted about your inquiry. Contact details only. Please do not include medical history or intimate health information.

Prefer to book directly?Book Xerf (opens in a new tab)